BOARDS
- 2 x Input Terminal
- 3 x Vicor Boards
- resolder pads for L1, L2, L3, L4, L5
- 2 x Power Distribution
- 12V/-12V models, output voltage can be set to 15V/-15V by connecting the output adjustment terminal TRM to -Vout.
- Rup/R68 should be populated
- 2 x Analog Backplane + JUMPER
- 2 x LO Backplane
- LO Distribution
- 16 x Receiver Boards
- 16 x Active Antennas
RX BOX
HEAT/VICOR Plate (2 sets, 8 Channel; 1 set, 4 Channel)
- Vicor Boards x 3
- 1 QTY EMI Gaskets, Sheets, Absorbers & Shielding EMI Shields
- 1 QTY Isolated DC/DC Converters C 9/36/28 15v/ 6.67A
- 1 QTY 4.991 kohm 1206 Resistor for rdown to set voltage down to 12.5 Volts from 15 Volts
- 3 SETS 12" QTY cable connector (2 red/2 black)
- 1 EACH Ferrite Clamp On Cores Round 9mm Cable Clamp Filter
- 2 Fork Terminal, #6 Stud, 16-14 AWG for black (-) and red (+) connections
- 1 EACH Mini-Fit Jr. Series, Receptacle, 6 Positions, 4.2 mm
- 3 QTY ROUND HEATPIPE 45W 6X200MM
- 3 QTY PER VICOR BOARD INPUT TERMINAL CONNECTOR
- 1 EACH 7" Black
- 1 EACH 8" Red * 6 QTY m3 washers
- 12 QTY m3x20mm screws
- 12 QTY M3 x 9mm CLEARANCE BRASS 4.75mm O/D
- Input Terminal x 2
- 8 QTY m3 washers
- 8 QTY m3x16mm screws
- 8 QTY M3 x 9mm CLEARANCE BRASS 4.75mm O/D
CONNECTOR Plate x2
- 17 QTY SMA Female to N Female Bulkhead
- 2 QTY UHF Female to UHF Female Bulkhead
- 2 QTY UHF Angle Connector
TOP_SECTION BASE PLATE x2
- DTACQ x1
- 4 QTY rubber mounts
- Fan Assembly x 2
- 2 QTY DC Fans 12Vdc 60x60x10mm (cable twisted)
- 4 QTY FAN MOUNT
- 1 QTY Headers & Wire Housings REC 02P CLOSED END
- 2 QTY DC Fans 80x80x25mm (cable twisted)
- 4 QTY FAN MOUNT
- 1 QTY FAN GUARD BLND HL MNT BLACK 80MM
- 14" cable extension 24AWG black/red
- 1 QTY Headers & Wire Housings REC 02P CLOSED END
- LO distribution Board x 1
- Power Distribution Board x 2
- 2 QTY 2" POWER DISTRIBUTION HEADER for Active Antennas x 2
- LO Backplane Power Cable (3 Black, 5 red) x 2
- 2 QTY Mini-Fit Jr. Series, Receptacle, 8 Positions, 4.2 mm
- 1 QTY Ferrite Clamp On Cores Round 13mm Black Cable Clamp Filter
- LO DISTRIBUTION Cable Power Connector (1 Red, 2 Black) x 2
- 2 QTY Mini-Fit Jr. Series, Receptacle, 4 Positions, 4.2 mm
- 1 QTY Ferrite Clamp On Cores Round 7mmUSB Black Cable Clamp Filter
- DTACQ Cable Power Connector x 1
- 1 EACH Mini-Fit Jr. Series, Receptacle, 6 Positions, 4.2 mm
- 11" DC Power Connector
- 1 QTY Ferrite Clamp On Cores Round 4mmUSB Black Cable Clamp Filter
RXBASE PLATE x 2
- 8 QTY M4x10
- 20 QTY 4mm x 5mm (8mm O.D.) spacers
- 20 QTY m3 x 12 mm
- 40 QTY m3 washers
- 76 QTY m3 x 3mm/4mm
SIDE CHANNEL LEFT PLATE
Fan Assembly x 2
- 1 QTY DC Fans Fan, 120x25mm, 12VDC Vapo
- 4 QTY FAN MOUNT
- 1 FAN GUARD BLND HL MNT BLCK 120MM
- 1 Headers & Wire Housings REC 02P CLOSED END
Cables and Connectors
- 2 QTY 5ft UHF (PL-259) Male cut to 30" + 10" RED/BLACK connector Fork Terminal + Ferrite Clamp On Cores Round 11mm Black Cable Clamp Filter
- 16 QTY RG316 SMA Male Right Angle to SMA Male Right Angle 24"
- 1 QTY RG316 SMA Male Right Angle to SMA Male Right Angle 36" + Ferrite Clamp On Cores Round 7mm USB Cable Clamp Filter x 2
- 4 QTY RG316 SMA Male Straight to MCX Male Right Angle 72" + Ferrite Clamp On Cores Round 7mm USB Cable Clamp Filter
- 1 QTY RG316 MCX Male Right Angle to MCX Male Right Angle 6"
- 6 QTY RG316 MCX Male Right Angle to MCX Male Straight 9"
- 1 QTY VHDCI cable with dual line
- 1 QTY 24" 2.54mm to 2.00 mm 2-pin + Ferrite Clamp On Cores Round 7mmUSB Black Cable Clamp Filter x 2
RX Grounding Connectors x 2
- 1 QTY 12" DTACQ to RX Plate
- 4 QTY 6" RX Plate to Connector Plate
- 2 QTY 10" RX Plate to Door
- 2 QTY 8" DOOR to female Bullet
- 2 QTY 8" DOOR to male Bullet
- 2 QTY 20" INTERM to RX Plate
- 2 QTY 4" INTERM to VICOR Plate
- 2 QTY 15db SMA Attenuator
TX BOX
PA BASE PLATE
TRACO Power Supply (on DIN RAIL)
- TRACO Power 600 Watts
- Fan Assembly
- 1 QTY DC Fans DC Fan, 80x80x25mm 12VDC
- 1 QTY FAN GUARD BLND HL MNT BLACK 80MM
- 4 QTY ROUND HEATPIPE 45W 6X200MM
- 1 QTY CIR BRK THRM-MAG 8A 240VAC/60VDC
- 2 QTY CIR BRK THRM-MAG 6A 240VAC/60VDC
- 1 QTY Industrial Relays 1 form C 16A 24VDC RED LED
- relay driver
HEATPLATE
- 1 QTY BTM00250-AlphaSA
- 1 QTY SMA Limiter
Connector plate
- 1 QTY SMA Female to N Female Bulkhead
- 1 QTY UHF Female to UHF Female Bulkhead
- 1 QTY UHF Angle Connector
- 1 QTY Female to Female N Bulkhead Lightning arrestor
- 1 QTY N Angle Connector
TOROID PLATE
- 2 QTY 1/2" Washer
- 1 QTY LOCK NUT NYLON
- 1 QTY 1/2" x 3.5"
- 1 QTY Isolation Transformer 600VA 50-60Hz 2x117V Dual Secondaries ]]
Cables and Connectors
- 2 QTY 5ft UHF (PL-259) Male cut to 14" + 10" BLACK(GREEN) + 10" RED + Ferrite Clamp On Cores Round 11mm Black Cable Clamp Filter
- 1 QTY RG316 SMA Male Right Angle to SMA Male Right Angle 42"
- 1 QTY RG316 SMA Male Right Angle to SMA Male Right Angle 12"
- 1 QTY RG142 SMA Male Straight to N Male Straight 24" + Ferrite Clamp On Cores Round 10mm Black Cable Clamp Filter
- 1 QTY 6" RED + 5" RED
- 1 QTY 6" BLACK + 5" BLACK
TX Grounding Connectors
- 1 QTY 3" TOMCO to RX Plate
- 2 QTY 6" RX Plate to Connector Plate
- 1 QTY 10" RX Plate to Door
- 1 QTY 8" DOOR to female Bullet
- 1 QTY 8" DOOR to male Bullet
COOLING
- DIN Rail Power Supplies 24W 12V 2A DIN-Rail
- 2 QTY DC FANS 12VDC 120x120x25mm + 2 QTY FAN GUARD + 8 QTY FAN MOUNTS
- 2 QTY FAN HEADERS SETS
- 1 QTY EXTRUDED HEATSINK
OTHER PARTS
- 1 QTY 5ft Type N Male to Type N Male (RG213) 50 Ohm Coaxial Cable Assembly (High-Power / Low-Loss)
- 2 QTY 5ft UHF (PL-259) Male to UHF (PL-259) Male (RG213) 50 Ohm Coaxial Cable Assembly (High-Power / Low-Loss)
- 16 QTY Active Antenna Glands
- 16 QTY Flat top PVC cups
