• Print
• .

HFDR accessories kit

This is a complete list of the items needed to install a MK-II rack-mounted HFDR

• Electronic components of the HFDR
  • 1 ea. PCUX computer w. 120V power supply, 4-slot 2.5" HDD trays,
  • 1 ea. HF power amplifier model PA-50, 120 V
  • 1 ea. HF frequency synthetizer model DDS, 12V
  • 1 ea. D-Tacq analog-to-digital converter, model ACQ164, 12V
  • 1(2) ea. HF complex receiver model CRX-8, 12V
• PC components
  • 2 ea. 20' LED/LCD display, with VGA and power cable
  • 1 set computer loudspeakers (for DDS)
  • 1 ea. wireless keyboard
  • 1 ea. wireless mouse
• coaxial cables
  • 2 ea. lemo-to-SMA cables (clock/trigger) (small pink RG316 cables)
  • 8(16) ea. brown RG400 cables (Ntype), Rx input to spark arrestor
  • 2(4) ea. RG58 cables, local oscillator IQ from DDS to IQ RX, 5', N-type male connectors
  • 1 ea. RG58/213 transmit cable, DDS(tx label) to PA(In label), 10', N-type male connectors
  • 1 ea. RG213/58 cable, PA Out to spark arrestor
• data cables
  • 1 ea F-F DB-9 serial cable (DDS to Dtacq Console (Back))
  • 2 ea. VGA (2 displays)
  • 2 ea. crossover ethernet cable, (Front Dtacq to computer(motherboard) and PA ethernet to computer)
  • 2 ea. HD68 (SCSI-3) cables, 1.5' (For RX1)
  • 1 ea. HD68 (SCSI-3) cables, 2.5' (For RX2)
  • 1 ea. ethernet cable (External internet to computer)
  • 1 ea. USB cable (DDS to LERA)
• power cables
  • 2 ea. Power Cables for 2 displays
  • 2 ea. 70W 12V power supply modules and cables, C5 male connector (DDS and Dtacq)
  • 1(2) ea. 110W 12V power supply modules and cables (Charinas cable, Amphenol connector)
  • 1 ea. power cable, 18 AWG, female C13 plug (to linux computer)
  • 1 ea. power cable, 16 AWG, female C13 plug (to power amplifier)
  • 2 ea. C5 male connector to jack female power adapter
• Miscellaneous (Not all are necessary, depending of the kind of HFDR installation and rack type)
  • 2 ea. 50-Ohm terminators (on FWD/REFL sample ports)
  • 1 ea. N-type elbow (on RF IN port)
  • 1 ea. perforated black aluminum filler, 1-U panel
  • 1 ea. perforated black aluminum filler, 2-U panel
  • 1 ea. 8-outlet 120V power distribution rail, 1-U panel
  • 2 ea. perforated black aluminum filler, 1-U panel
  • 2 ea. N-type 50 Ohm attenuator for I&Q DDS
  • 4 ea. N-type elbow (on I/Q LO ports)
  • 1 ea. SCSI 32-channel combiner with calibration board, 1-U panel
  • 1 ea. bag spare screws (in zip pocket)
    • 8 rack rail screw
    • 4 set sliding rail screw+nut
    • 4 PCUX/DDS cover screw
    • 16 CRX-8/DDS/PA enclosure screw
    • 16 1/4" 4/40 PC board screw
    • 8 4/40 press-nut
  • 1 ea. 4-GB USB key with bootable Ubuntu 12.04 (in pouch)
  • 1 ea. 50-Ohm BNC terminator for DDS calibration (in pouch)
  • 2 ea. N-type 10dB attenuator for PA input (in pouch)
  • Ferrites for cables
  • Zip ties
• For calibrations and tests
  • Spectrum Analyser
  • Oscilloscope
  • Bidirectional Coupler
  • If not bringing oscilloscope, novatech and laptop
  • Keyspan and USB cable (From Dtacq USB entrance to serial entrance in Computer)
• Some items for certain kind of racks
  • 4 ea. removeable wood feets
  • 1 set 24" rack slides
  • 2 ea. doors
  • 1 set 20" rack slides
  • 2 ea. doors
  • 4 ea. removeable wood feets
  • 2 sets 24" rack slides
  • 1 ea. perforated black aluminum filler, 2-U panel
  • 2 ea. welded aluminum reinforcement frame
  • 2 ea. doors
  • 4 ea. removeable wood feets
  • 2 sets of 4 rack wheels in cardboard box
  • 1 ea. 10' ratchet belt
  • 2 ea. bag bungy cords (to hold doors in open position)